CDM Electronics has announced the availability of Eaton’s full line of multifunctional C4ISR/tactical communications rectangular Hotshoe signal interconnects. Eaton’s hotshoe interconnects are available in 22-pin and 32-pin configurations that include both panel and cable mounted connectors with grounded and non-grounded versions. Options include unique self-cleaning accordion-style contacts or standard spring-mounted contacts. Eaton’s unique contact design … read more
CDM Electronics has announced the promotion of Al Tulini to Director of Quality, overseeing all CDM’s ISO-based quality initiatives company-wide. Al will oversee quality inspection, manage customer first article test requirements, establish quality standards and coordinate all quality related functions at the Salisbury, MD, Turnersville, NJ and Richardson, TX facilities. Al brings over 30 years … read more
CDM Electronics today announced the opening of their supplier Sumitomo’s new shrink tubing manufacturing location in San Marcos, California. Sumitomo’s facility features new, high-capacity production equipment that will provide an enhanced inventory position for CDM, and assure shorter lead times for nonstandard products. Focus shrink tubing lines at the new production facility will be the … read more
CDM Electronics today announced the opening of a full-service Times Microwave Systems products distribution center at their new Richardson, Texas location. The new fully stocked, 6400 square-foot distribution center now serves as CDM’s Midwest regional service hub from which orders for Times’ coaxial cable, connectors and accessories will be fulfilled. CDM’s fully staffed 2-bay warehouse … read more
CDM Electronics today announced that they will remain open operating under normal business hours, to continue providing essential services per a U.S. Department of Homeland Security (DHS) released advisory guidance. CDM maintains their Global Headquarters along with distribution and manufacturing facilities in New Jersey, which has a Shelter-in-Place order requiring citizens to stay at home … read more
CDM Electronics has announced the completed reconfiguration of their fully equipped and certified Quality Engineering and Test Laboratory. Designed to validate the quality and integrity of CDM’s value-added builds, CDM can now virtually accommodate any testing requirement to safeguard the integrity of customer’s supply chain. The laboratory confirms compliance with all applicable military and commercial … read more
CDM Electronics today announced the opening of their new Richardson, Texas facility. The new office now serves as CDM’s Midwest and Great Plains regional operating hub from which specialized sales, engineering and technical support are provided to CDM customers along with processing DOD (Department of Defense) and Defense Supply Center Columbus (DSCC) contracts. CDM’s new … read more
CDM Electronics today announced the availability of Times Microwave Systems’ revolutionary new CCT-03 coaxial cable cutting tool. The tool is uniquely optimized to cut Times Microwave’s ≤ 0.600” diameter coaxial cable with just one cut. Specifically intended for use by operators of any skill level to reduce training requirements, its utilization minimizes waste and ensures … read more
CDM Electronics has announced the availability of extended life heat shrink tubing manufactured by Sumitomo Electric Interconnect Products Inc. (SEIP). The new SAE AS23053 standard requiring QPL approval replaces MIL-I-23053, MIL-DTL-23053 and SAE-AMS-DTL-23053 specifications, which establish the requirements for various types and colors of electrical insulating sleeving that will shrink to a predetermined size upon … read more
CDM Electronics has announced the promotion of William Almon to Vice President of Sales and Marketing effective October 1, 2019, overseeing all of CDM’s sales, business development, advertising and marketing initiatives. Bill brings nearly 25 years of electronics distribution and sales management experience to his new role, including an extensive background with interconnect industry giant … read more
CDM Electronics has announced the promotion of Nick Sarin to Assistant General Manager, where he will assist in overseeing all functional areas of the Turnersville facilities to include manufacturing and quality. Nick started at CDM in 2010, with his most recent role that of Value Added Engineer where he was instrumental in planning and implementing … read more
CDM Electronics and Times Microwave Systems® are offering an LMR Connector and Accessory Certified Installer Training Program along with training on Grounding & Lightning Protection. The FREE class will take place on Tuesday, September 17th from 9:00 a.m. to 4:00 p.m. ET. Snacks and lunch will also be provided. LMR Connector and Accessory training includes: … read more
CDM has announced the opening of an additional 9,000 square foot manufacturing and distribution center in Turnersville, New Jersey CDM Electronics, a premier authorized distributor of electronic connectors and cables to the world’s leading aerospace, military, telecom, automotive, industrial, railway, commercial, and alternative energy providers, announced the opening of a new 9,000 square foot manufacturing … read more
Tariffs: More Than a Political Strategy Electronics industry insiders discuss effects of current tariffs. For political pundits, the United States government’s tariff strategy is about political leverage. For electronics OEMs, however, tariffs are about business. Click here to view article
CDM Electronics has announced the promotion of Robert Grzib to Marketing Manager at the Turnersville, NJ, global headquarters. In this new position, Robert will draw on his market and product knowledge to define, develop and implement the strategy for corporate branding and advertising as well as customer outreach. Robert will also plan and organize marketing … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the availability of the Sumitomo Electric Interconnect Products Inc. (SEIP) Sumitag Shrink Tubing Marking Systems optimized for aerospace, military and mass transit cable assembly OEMs. Systems include the high-volume STP-300 SS single sided printer, and the market-exclusive STP-300 DS double sided printer. … read more
Times Microwave Systems Termination Training This video explains how to terminate both the TC-240-SM-SS-X and EZ-240-SM-X connectors using a variety of tools and LMR-240 coaxial cable. Click here to view assembly instructions
CDM Electronics has announced the promotion of Christina Harrison to Product Manager at the Turnersville, NJ, global headquarters. In this new position Christina will draw upon her product knowledge to administrate purchasing and inventory management functions for new and current products, along with providing support and resources to achieve bookings, revenue and profitability objectives for … read more
CDM Electronics has announced the promotion of Sherry Meyer to Office Manager at the Turnersville, NJ, global headquarters. In this diverse new position Sherry will manage CDM’s company-wide administrative and sales support staff to include daily assistance for systems and customer experience activities while monitoring workload and resource scheduling. Sherry will also manage hiring for … read more
CDM Electronics and Times Microwave Systems® are offering an LMR Connector and Accessory Certified Installer Training Program along with training on Grounding & Lightning Protection. The FREE class will take place on Tuesday, September 18th from 9:00 a.m. to 4:00 p.m. ET. Snacks and lunch will also be provided. LMR Connector and Accessory training includes: … read more
CDM Electronics has announced it recently received Raytheon’s Integrated Defense Systems (IDS) business’ 4-Star Supplier Excellence Award for their performance throughout 2017. The Supplier Excellence Award program recognizes suppliers that consistently deliver outstanding service and partnership in exceeding customer requirements. CDM had also been presented with the prestigious 4-Star Supplier Excellence Award in 2015. Raytheon … read more
CDM Electronics has announced the promotion of Nicolette Sarin to Operations Assistant at the Turnersville, NJ, production facility. In this new position Nicolette will assist in the daily operation of CDM’s warehouse and production areas to include overseeing the processing of government orders, reviewing and resolving past-due items, preparing improvement-focused performance metrics, and coordinating inter-departmental … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced that most cables, connectors, accessories and tools from Times Microwave Systems will increase in price starting on April 1, 2018. Times has allowed CDM a 60-day grace period between the announcement and implementation of new increased pricing, providing customers a final chance … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, now has available the Super Duty Class L Assemblies-series of high-power cables for military, industrial and homeland security/disaster relief usage. Engineered to provide consistent, high-current delivery of power between generators, power distribution equipment and shelters, the Super Duty series utilizes rugged, self-grounding MIL-DTL-22992 connectors … read more
CDM Electronics has announced the promotion of Mike Liccketto to Director of Quality, overseeing all of CDM’s quality initiatives company-wide. Mike brings over 35 years of experience in electronics and quality management to his new role, including an extensive background implementing and sustaining Quality Management Systems in the telecommunications industry at GTE and Alcatel-Sprint. Mike … read more
CDM Electronics has announced the promotion of Al Tulini to Quality Manager, overseeing every aspect of quality assurance, product inspection, calibration of monitoring/measuring devices, customer/supplier corrective actions, etc. Al brings over 30 years of experience in electro-mechanical manufacturing and quality management to his new role, much of which from WPI Interconnect/Cooper Interconnect where he specialized … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, is now a stocking distributor of Binder USA’s circular connectors, cordsets and adapters optimized for the food, beverage, pharmaceutical, and chemical industries. Engineered to provide power and Ethernet connectivity to processing automation equipment while significantly reducing production downtime, the cordsets are optimized to withstand … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, will showcase their extensive portfolio of railway connectivity products and value-added cable assemblies at the 2017 Railway Interchange RSSI (Railway Systems Suppliers Inc.) 57thAnnual Exhibition at the Indianapolis Convention Center in Indianapolis, IN on September 17-20, 2017. CDM will present its comprehensive offerings of … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the availability of a comprehensive array of semi-custom and custom cable assemblies optimized to meet the latest requirements of Positive Train Control (PTC) systems that are designed to prevent train-to-train collisions, derailments caused by excessive speeds, unauthorized train movements in work zones, … read more
Announced today by CDM Electronics, a premier authorized distributor of electronic connectors and cables, is the availability of the latest generation of Eaton’s Micro – Military Circular Connector Series with shell diameters as small as 0.43” (11 mm). The feature-packed series consists of fast-mating M1 (dual-start) and M5 (triple-start) connectors optimized for harsh environment applications … read more
CDM Electronics would like to thank everyone involved in the May 3 training session held on the campus of Rowan University in Glassboro, NJ. Times Microwave’s Lou Caruso covered correct cable selection for the application, best practices for consistent results, and troubleshooting termination and install issues. Participants received a certificate of training upon completion of … read more
CDM Electronics and Times Microwave Systems® are offering an LMR Connector and Accessory Certified Installer Training Program along with training on Grounding & Lightning Protection on Wednesday, May 3, 2017. CDM has discounted pricing at the below hotel if you would like to stay overnight. (Just mention CDM Electronics’ Room rate) The FREE class will … read more
CDM Electronics has announced the promotion of Dawn Lochner to General Manager, where she will oversee all functional areas of both the Turnersville and Williamstown facilities to include manufacturing, quality and purchasing. Dawn started at CDM in June of 2006 as an Administrative Assistant, was promoted to Buyer then earned the positions of Purchasing Manager … read more
CDM Electronics has announced the promotion of Scott Bozarth to CDM Williamstown, NJ Operations Manager, where he will oversee all functional areas of that facility including machine shop activities, shipping, receiving, and RF product fulfillment. Scott’s background is in high-volume distribution, and started at CDM in August of 2008 as Product Manager. Scott’s responsibilities grew … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the availability of the full line of SRI Connector Gage RF connectors, adapters and accessories. The new SRI Connector Gage products provide RF interconnect solutions for military, aerospace, communications, satellite, medical and test equipment applications. The SRI Connector Gage line includes over … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the availability of semi-custom SAFER (Smoke and Fire Exposure Reducing) Cable™ Assembly Series for RF, Ethernet (RJ45), and power applications. The low-smoke zero-halogen (LSZH) SAFER cable assemblies are intended for spaces where large amounts of cables are in close proximity to people … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the Company has received Nadcap (National Aerospace and Defense Contractors Accreditation) accreditation from the Performance Review Institute (PRI) for electronics. “The achievement of Nadcap accreditation further certifies CDM’s ongoing efforts to supply the aerospace and defense industry with superior products and services, … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the availability of the newly released SEIP (Sumitomo Electric Interconnect Products, Inc.) SumiMark® IV 300 DPI Marking System. Featuring state-of-the industry Windows®-compatible SumiLabel™ software engineered specifically for the cable identification industry, the fully-integrated and easy-to-operate marking system no longer requires a dedicated … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, now stocks the Times Microwave Systems’ Times-Protect® Data Line Series of lightning and surge protectors, which includes LP-DOE-1G, LP-POE-1G and LP-PAE-100 modules. The compact devices are engineered to support the highest level of surge protection for twisted pair Cat 5e and Cat 6 cables, … read more
Announced today by CDM Electronics, a premier authorized distributor of electronic connectors and cables, is the availability of Eaton’s micro-military circular connector series precision engineered for a broad spectrum of harsh environment applications ranging from C4ISR (Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance) to space flight. Comprised of the M1 (dual start) and M5 … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced it is the recipient of the 4-Star Supplier Excellence Award from Raytheon’s Integrated Defense Systems (IDS) business. The Supplier Excellence Award program was instituted to recognize suppliers that consistently deliver outstanding service and partnership in exceeding customer requirements. CDM was presented with … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the availability of Eaton’s Titan Ground Power™ Series of cable assemblies and field-replaceable adapters for commercial and military aircraft. The parts’ advanced interconnect technologies decrease mating forces by 40% and demating by 60% to extend aircraft power receptacle life and reduce receptacle-related … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the availability of the semi-custom Signal Storm Cable Assembly Series of RF jumper assemblies, engineered to withstand the harshest operating conditions and requirements. Providing a complete interconnect solution for the full spectrum of RF connector interfaces, assemblies feature Times Microwave 50 Ohm … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, will showcase their extensive portfolio of railway connectivity products and value-added cable assemblies at the 2016 RSSI (Railway Systems Suppliers Inc.) 56th Annual Exhibition at the Gaylord Texan Resort and Convention Center in Grapevine, TX on June 28-30, 2016. CDM will present its comprehensive … read more
CDM Electronics has announced the promotion of Lori Maeder to Vice President of Operations, where she will oversee all operational areas within the company. Lori started at CDM in 1997 as a receptionist, and being a small but rapidly growing company Lori was given the opportunity to work in virtually every position within the organization. … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, now stocks Binder-USA’s newly designed member of the HEC (Harsh Environment Connector) family. Engineered to deliver uncompromised performance in demanding environmental conditions, the new 12-pin HEC circular connectors offer power interconnect solutions to a variety of commercial, industrial, agricultural, military and aerospace applications. These … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced it is a full line stocking distributor for Winchester Electronics’ comprehensive range of Rack and Panel and Combination D-Subminiature/Combo D-Sub interfaces. The portfolio includes complete series of backplane connector systems, input/output (I/O) connectors, power connectors and accessories. Comprised of 5 series of … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, now stocks the full Times Microwave Systems’ Times-Protect™ Series of surge and lightning protection products and accessories. These uniquely engineered connectors meet or surpass all industrial, commercial, military and aerospace wireless communications standards for equipment and infrastructure with a frequency operating band from DC … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, now distributes the Amphenol Pcd Luminus Series of interconnect solutions engineered to support highly reliable low-to-moderate-power and communication signal transmission in military and commercial aerospace applications. The lightweight, cost-effective series comprises a range of connectors, receptacles, contacts and accessories in various configurations and arrangements … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, now provides an expanded range of custom and value-added RF coaxial cable assemblies and power jumper cable assemblies to meet the heavy duty, harsh environment requirements of the U.S. and Canadian freight and rail passenger industry. These new customization capabilities and value-added services are … read more
CDM Electronics, an authorized stocking distributor of Times Microwave Systems, held free Times Microwave Technical Seminars on November 4th and November 5th at their Turnersville, NJ headquarters hosting nearly 50 participants. The Wednesday, November 4th session was a hands-on instructional workshop utilizing Times Microwave’s LMR-series of coaxial RF cable and compatible connectors. The Thursday, November … read more
CDM Electronics has announced the promotion of Dawn Lochner to CDM Williamstown, NJ Operations Manager, where she will oversee all functional areas of that new facility. Dawn started at CDM in June of 2006 as an Administrative Assistant, was promoted to Buyer, then earned the position of Purchasing Manager. Dawn’s most recent promotion was to … read more
Announced today by CDM Electronics, a premier authorized distributor of electronic connectors and cables, is the opening of a new distribution center in Williamstown, NJ, to exclusively support Times Microwave Systems’ broad range of transmission line solutions for military, aerospace, wireless communications and industrial applications. The 10,000-square-foot facility stocks more than 30,000 Times Microwave Systems’ … read more
Announced today by CDM Electronics, a premier authorized distributor of electronic connectors and cables, is the availability of Clements National Company’s Cadillac® brand of 27-point jumper assemblies, receptacles and accessories for freight and rail passenger trainline communication and control. The parts inventoried include the CRA Series receptacles with male contacts, the CPA Series jumper assemblies … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the opening of a new Plano, Texas facility. The office now serves as CDM’s Midwest and Great Plains regional operating hub from which specialized sales, engineering and design support are provided to current customers and the U.S. and Canadian railroad industry, as … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced it received the Soldier’s Network Defender of the Year Award for 2015 from defense contractor General Dynamics Mission Systems, which connects soldiers and protects their communications and information across land, sea, air, space and cyber domains. CDM is one of only eight … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, will display an array of rail-specific connectivity products at ASLRRA’s (American Short Line and Regional Railroad Association) 2015 Annual Meeting and Exhibition Conference in Orlando, FL, March 28-31, 2015. CDM will exhibit at booth #829. At the Conference, CDM will showcase parts from their … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the availability of a broad range of Times Microwave Systems’ coaxial cable assemblies, sweep leads, test leads, loads and adapters that are approved by Verizon Wireless® Network Maintenance Engineering. The cable assemblies include the plenum-certified SPP™ Series of low loss, low PIM … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, carries the full line of Kings® by Winchester Electronics’ RoHS-compliant, 50-Ohm Mil-Spec RF connectors and accessories for today’s mission-critical military and aerospace communications applications. CDM now stocks one of the industry’s largest inventories of standard and customizable Kings’ 50-Ohm RF interconnect products, which notably … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced a significant expansion of their MIL-DTL-55116 (part #M55116) audio frequency connectors and MIL-DTL-55181 (part #M55181) mid-range power connectors. CDM is an authorized stocking distributor for the complete line of TacCom connectors, and accepts online orders for prototype as well as production quantities. … read more
CDM Electronics, Inc. is AS9100C Certified!!
On August 22, 2012, the U.S. Securities and Exchange Commission (SEC) put in place a set of rules for implementation of Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act which, beginning in January 2013, requires publicly traded companies to disclose the use of conflict minerals in their products that originated in … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, has an extensive inventory of connectors, cable assemblies and accessories from worldwide electronics leaders for same-day shipping. CDM has a 24,000-square-foot facility with over 5,000,000 connectors, cables, and accessories on the shelves. New for 2012 is an additional 7,500-square-feet of storage space to accommodate … read more
CDM Electronics, a premier authorized distributor of electronic connectors and cables, has an extensive inventory of supplies and accessories for the newest generation SumiMark IV 300 DPI shrink tubing printer from Sumitomo. CDM has over 55,000 feet of SumiMark-specific shrink tubing in stock, along with print ribbon and other replacement parts. CDM also inventories SC-CM … read more
CDM Electronics now offers nearly 6,000 different mil-spec M85049 backshell termination accessories from worldwide leader Amphenol PCD to meet virtually every application need. CDM Electronics has a full selection of Band Lock Adapters, unique tool-free Crimp Adapters, Quick Clamps, Shrink Boot Adapters, and all of your favorite Strain Reliefs. These vital accessories are for use … read more
CDM Electronics, a premier authorized distributor for manufacturers of electronic connectors and cables, now offers the full line of Times Microwave Systems Lightning Protection. CDM has been a long time partner of Times Microwave Systems and welcomes the addition to the existing line of LMR products. Times Microwave System’s unique surge protection devices address applications … read more
CDM Electronics, a premier authorized distributor for manufacturers of electronic connectors and cables, now stocks the full line of connectors and accessories from worldwide leader Conec to meet virtually every application need. CDM has grown their full line of standard and specialty D-SUB connectors from Conec to include filtered, combination, and IP67-rated versions. CDM also … read more
CDM Electronics, a premier authorized distributor for manufacturers of electronic connectors and cables, now offers the full line of subsea connectors, cable assemblies and accessories from worldwide leader Cooper Interconnect’s Burton brand. CDM Electronics has added a selection of over 1200 Burton subsea connectors, penetrators, cable assemblies and accessories to its product mix. Included are all … read more
CDM Electronics, a premier authorized distributor for manufacturers of electronic connectors and cables, now offers the full line of backshells and accessories from worldwide leader Amphenol PCD to meet virtually every application need. CDM Electronics has added a selection of nearly 10,000 Amphenol PCD backshells, adapters, strain reliefs, and other accessories to its product mix. Included … read more
CDM Electronics ad in Mission Critical Magazine
“We would like to personally thank you for your outstanding support to Lockheed Martin Missiles and Fire Control and our Customers throughout 2009. One of our focus items for the last couple of year has been to raise the bar for Supply Chain performance, expecting 100% on time Delivery and 100% Quality to maximize mission … read more
CDM Electronics, Inc., a leading distributor of commercial and military (MIL-SPEC) interconnect products, and provider of value-added contract manufacturing services, today announced that within the first half of 2009 it has been the proud recipient of World Class Supplier Awards and Special Recognition Manufacturer Awards. – Northrop Grumman – 2008 Supplier Excellence and World Class … read more
CDM Electronics was recently honored with a Supplier Excellence award from Northrop Grumman Mission Systems. “Northrop Grumman endeavors to always provide the highest quality products and services to our customers so that they can succeed in their missions. When our suppliers meet or exceed Northrop Grumman’s expectations, we can do the same for our customers,” … read more
CDM Electronics, Inc., a leading distributor of commercial and military (MIL-SPEC) interconnect products, and premier provider of military cable assemblies, today announced official registration with ITAR, (International Traffic in ArmsRegulations). “This registration demonstrates CDM’s commitment to maintaining security among information pertaining to military & defense technologies,” stated General Manager, Carmen J. DeLeo. He added, “This … read more
CDM Electronics, Inc., a leading distributor of commercial and military (MIL-SPEC) interconnect products, and premier provider of military cable assemblies, today announced additional certifications to the IPC-WHMA-A 620 military standards and J STD-001 for soldering. The standards encompass requirements for acceptance for cable assembly and wireharness fabrication. “These certifications bring our total to twenty-two assemblers … read more
CDM Electronics, Inc., a leading distributor of commercial and military (MIL-SPEC) interconnect products, and provider of high precision cable assemblies and value-added contract manufacturing services, today announced the signing of a worldwide distribution agreement with Kings Electronics Corporation, a premier manufacturer of RF connectors. Under the terms of the agreement, CDM will distribute Kings’ extensive … read more
CDM Electronics, Inc., a leading distributor of commercial and military (MIL-SPEC) interconnect products, and provider of value-added contract manufacturing services, today announced the signing of a worldwide distribution agreement with Delta Electronics Manufacturing Corporation (Delta), a premier manufacturer of RF, microwave, and millimeter-wave connectors. Under the terms of the agreement, CDM will distribute Delta’s extensive … read more
CDM Electronics, Inc., a leading distributor of commercial and military (MIL-SPEC) interconnect products, and premier provider of military cable assemblies, today announced full certification to the IPC-WHMA-A 620 military standards and J STD-001 for soldering. The standards encompass requirements for acceptance for cable assembly and wire harness fabrication. “These certifications demonstrate our commitment to the … read more
CDM Electronics, a leading distributor of commercial and military (MIL-SPEC) interconnect products, and premier provider of value-added contract manufacturing services, is now offering phase stable cable assemblies utilizing Times Microwaves Systems’ PhaseTrack™ -210 cables with TF4™ dielectric technology. This proprietary dielectric is a flouropolymer material process developed specifically for employment in RF and microwave applications … read more
CDM Electronics, Inc., a leading distributor of commercial and military (MIL-SPEC) interconnect products, and premier provider of value-added contract manufacturing services, announced the promotion of Lemuel “Lem” Agustin from international sales representative to the newly created position of value-added product specialist. The announcement was made by Carmen DeLeo, Jr., general manager of CDM, and to … read more
CDM Electronics, Inc., a leading distributor of commercial and military (MIL-SPEC) interconnect products, and provider of value-added contract manufacturing services, today announced the signing of a worldwide distribution agreement with Winchester Electronics, the Connecticut-based business unit of Northrop Grumman Corporation’s (NYSE:NOC) Component Technologies sector. Under the terms of the pact, CDM now exclusively offers and … read more
CDM Electronics, Inc., a premier provider of value-added cable assemblies and specialized distributor of commercial and military (MIL-SPEC) interconnect products, is the availability of WPI Viking’s VikCon® environmentally sealed, circular plastic connectors. Specifically designed to carry power and control signals in harsh environments, these dust, corrosion and chemical resistant devices are sealed and submersible to … read more
CDM Electronics Inc., a premier provider of value-added cable assemblies, and specialized distributor of commercial and military (MIL-SPEC) interconnect products, announced the availability of custom medical cable assemblies featuring color-coded WPI®/Viking Thorkom circular connectors. Designed to withstand autoclaving and irradiated sterilization essential for medical instruments and test tubes, CDM’s 100% electrical tested medical cable assemblies … read more
CDM Electronics, Inc., a leading distributor of commercial and military (MIL-SPEC) interconnect products, and premier provider of value-added contract manufacturing services has signed a worldwide distribution agreement with Times Microwave Systems (TMS), a leading global manufacturer of interconnect devices. Under the terms of the agreement, CDM will stock and distribute TMS’s full product offering, including … read more
